/
Nevron Demo Kit

Nevron Demo Kit

Owned by Kaja Gril
Last updated: Aug 30, 2024 by Sonja Malavašič (Unlicensed)

Nevron Demo kit is a small portable server with 2 set boxes, configured to operate instantly in any environment.

All it requires to operate is a TV with HDMI and a couple power outlets. AXON Middleware, Streamer and VoD are installed on the server and are fully functional. The network is configured to work without a switch, using just UTP cat5 cable. Streaming is pre-configured as emulated sources. Additional streams can be configured if a source of signal is available on site. The server has 2 DVB cards installed for use of external signal sources.

Installation

When providing a prepared demo kit to clients, the process is relatively simple. The client only needs to connect the TV screen to our STB (Set-Top Box) and power on the demo server.

However, if the client is using their own Smart TVs, they will need to configure the TVs to properly link to our IPTV system. This configuration typically involves adjusting the network settings on the Smart TV to connect to our IPTV server.

In the case where the client provides their own server or virtual machine for the installation of the IPTV system, we have provided an article with instructions. The article contains detailed steps and guidelines to assist the client in setting up the server or virtual machine correctly.

If the client requires further assistance or encounters any issues during the setup process, our support team is available to provide guidance and support.

Please let us know if you need the article or if you have any specific questions regarding the setup of the IPTV system on a client-provided server or virtual machine.

 

Server

Nevron supplies a Demo kit with a pre-configured server.

In case you want to install it on your server (physical or virtual), use instructions below.

Process of installing demo or real project is same. Only difference is in setting licenses.

Process of updating existing server is different in that stage, that backup needs to be done if you plan to keep existing database and not setting clean one. Other steps are same. If you are doing just MW install update, the backup is automatically created, but if you reinstall centos, then you need to save files to your PC first.

  1. Get a server with x86_64 CPU (Intel Core i3 or better), 8Gb Ram, 1Tb storage, 2x 1Gbit NIC. Nevron use a small Entry-level server HPE ProLiant MicroServer Gen10. Virtual machine is also suitable.

  2. Install Rocky 8.x on the server. Install Rocky 8.x OS

  3. Install AXON Middleware Install Axon IPTV SW

  4. Install AXON demo database How to install the demo database

  5. To connect a SMART TV, first check if it is compatible and then enable Nevron client software on them as per these manuals.

  6. Update STBs if necessary. Updating STB Firmware

  7. Configure live or pre-recorded streams. Streamron Headend user manual

  8. Customize content if needed. Axon IPTV manager user manual

 

Below is attached a step-by-step .pdf on how to set up a DEMO System with casting.

 

Nevron Support Team

If you need assistance or encounter any issues, please contact our support team. You can reach us on support@nevron.eu or submit a ticket at https://nevron.atlassian.net/servicedesk/customer/portal/1/group/1/create/1 Please provide detailed information about the problem you're experiencing, including any relevant error messages or system details. We appreciate your patience and will work diligently to resolve your concerns.

Related content